Infrastructure and manufacturing
Manufacturing in the Monterrey metro area.
Explore the equipment, molds and process IBMS uses to manufacture large-format plastic products in Guadalupe, Nuevo León.
01 — Technology
Large-format blow molding
Accumulator-head extrusion blow molding forms hollow parts of large volume and thick walls. The thickness profile is defined according to the part.
02 — Machinery
Blow molding machines with accumulator heads
Equipment declared by IBMS: three Sterling machines dedicated to large-format products, with thickness control and interchangeable molds by product line.
To be confirmed
03 — Molds
Available molds and custom development
Declared molds for industrial pallets, 55-gallon drums and 40-gallon bins. For new geometries, technical feasibility, tooling investment and minimum production volume are assessed.
To be confirmed
04 — Support infrastructure
Support system around blow molding
Declared equipment: grinders, hoppers, blowers, conveyors, chiller and compressor, plus a 500 kVA substation and industrial distribution panel.
To be confirmed
All technical data in this section is information declared by IBMS and is pending verification with its engineering team. Every figure is individually identified as pending confirmation.
05 — Process
From pellet to finished part.
06 — Quality (to be confirmed)
Declared controls at every stage.
The following controls are information declared by IBMS and are pending validation.
- Dimensional and weight verification per run
- Wall thickness control during the process
- Visual inspection of finish and flash
- Final review before storage and shipment
Resin intake
Material receiving with lot identification.
Grinding
Material reuse through grinders.
Extrusion
Plastification and parison forming with an accumulator head.
Blow molding
Part forming inside the mold.
Cooling and demolding
Dimensional stabilization and part removal.
Verification and shipping
Visual and dimensional inspection before loading.
07 — Custom development
Your geometry, our blow molding capability.
We evaluate non-catalog parts —containers, tanks or large-format parts— with technical feasibility, mold investment and minimum volume per project. Send drawings or requirements and we will reply with the technical assessment.